|
Green State Zirconia Finishing Kit
Our green state finishing kit offers several unique instruments that assist in preparing your pre-sintered zirconia restorations. Individual components are
also available separately. |
Each Kit Includes
6 Hand Piece Diamonds for anatomical adjustments. Each diamond is fine grit and has a unique particle shape for improved results.
1 HE Silicone Wheel # 501 for sprue and flash removal.
1 HE Silicone Point # 504 for refining difficult areas.
1 GS Contour A 2 step “finessing tool” for making final adjustments.
6 Hand Piece Diamonds for anatomical adjustments. Each diamond is fine grit and has a unique particle shape for improved results.
1 HE Silicone Wheel # 501 for sprue and flash removal.
1 HE Silicone Point # 504 for refining difficult areas.
1 GS Contour A 2 step “finessing tool” for making final adjustments.
|
|
GS CONTOUR
|
501
|
504
|
STEP 1 After preliminary reduction of excess green state zirconia is completed using our #501 silicone wheel, the technician should make final adjustments with the GS Contour 2 step tool. The GS Contour tool should be used under loupes or micro-scope at the very last adjustment point.
The larger gray segment of this new and unique tool quickly reduces the larger final mass of the sprue with minimal risk for damage to the green state ZR. |
STEP 2 The ultra fine white tip then gently removes any final excess material.
|
The GS Contour tool should be used under loupes or microscope at the very last adjustment point.
This tool is not for gross reduction of green state flash or sprue sections.
The #501 silicone wheel should be used for gross reduction, followed by the GS Contour tool at low rpm. This is a “finessing tool” for obtaining perfection of restoration.
This tool is not for gross reduction of green state flash or sprue sections.
The #501 silicone wheel should be used for gross reduction, followed by the GS Contour tool at low rpm. This is a “finessing tool” for obtaining perfection of restoration.